The EQ Damper: How It Works

The original EQ Damper is designed to integrate seamlessly with our 1.25” diameter weights, stacking cleanly in your system while cutting vibration.

You can set it up in two main ways:

1. Sandwiched between weights (recommended) – with weight on both sides of the damper.
   

2. Directly on the stabilizer – with all weights on the outside of the damper.
   
   

Both options are valid, and experimenting with each can help you dial in your ideal shot feel.

Recommended Starting Points

Each durometer of EQ Damper pairs best with a certain range of weight on the outside. Use these as guidelines:

• 30 durometer (softest): 1–4 oz
  
  

• 40 durometer (medium): 4–8 oz
  
  

• 50 durometer (firmest): 8–12 oz
  
  

These ranges are not hard limits. They’re designed to give you a reliable starting place before you start fine-tuning.

Fine-Tuning for Feel

Because the EQ Damper is built to work with weight on both sides, you can mix and match nearly any durometer with any total mass weight.

For example:

• Say you’re running 8 oz of front weight with a 40 durometer EQ Damper.
  
  

• If it feels too “floppy” when all 8 oz are placed on the outside, start shifting some of that mass inward.
  
  

• Place part of the weight stack between the stabilizer and the damper, and leave the rest on the outside until you hit the feel you want.
  
  

This method of balancing inside vs. outside weight is the key to unlocking the best feedback and bow reaction for your shot style.

Signs you've found the optimal balance

The “perfect” damper setup isn’t the same for everyone. Some archers prefer a firm, solid feel that preserves every bit of aiming stability. Others value maximum damping, even if it adds a touch more flex.

You’ll know you’re close to the right balance when:

• You like how your bow sounds on the shot
  
  

• You like how your bow feels in your hand
  
  

• Your bow still aims steadily, without feeling loose or floppy
  
  

In the end, the best damping setup is highly personal. If your bow feels and performs the way you want then you’ve found the right configuration for you.

If you want to learn even more about vibration and how it affects your bow check out this article all about vibration!